rod

Hello everyone. I have a 212old style. Getting ready to order parts, im taking out my governor so I'm going to get a fly wheel rod a cam new springs push rod lifters and maybe rockers. The only thing is I don't know which to get. They all have different specs and I don't want to get the wrong...

New Robertson billet rod for Briggs Intek.. $30 plus $7 ship

So I've done a combination of about 6 of the hemi motors with stock, 20, and 40 thou longer rods. I ran into a problem with the 40 thou longer rod hitting the middle of the cam between the lobes. Eh....anyone else have this problem?

I have a non Hemi predator with a .020 longer rid and stock piston. I was wondering if there is enough room to throw in a flat top piston too without an issue or if I need a stock length rod? Bonus if I can use a smaller gasket!

Does anyone have any pictures of the spring and linkages for the throttle. I have a 70 roadster with a broken governor spring and a bent throttle rod. Looking to see what parts I might need to buy.

Just bought a Z4M flat top to go in my gx160 but trying to decide which billet rod to use. .010 over or .020 over or stock on the rod length ? Haven't put piston in yet with stock rod to see how deep in hole it is but was wondering if anyone else has already tried this and can add some light as...

Hello All, I am doing a restomod Taco T100 and need some parts! I had complete Ceriani shocks before I left for a business trip, now I don't! Specifically I am missing the aluminum piece that the rod slides through, the small spring that goes over the rod for rebound, and the nut that holds it...

I recently bought a rod on ebay titled Tecumseh racing rod #36974k. The problem is that it does not fit my engine. My engine is a newer 10hp medium frame Tecumseh flathead. The small end of the rod is to small for the piston pin. According to my research that rod should fit. Can anybody...

I am rebuilding my 1987 Honda XR600. The guy doing the rod asked if i rode it on the road. It is dual sported so yes, it sees road use....he wont sell me the rod he has, as it says off road use only. I looked up parts for a XL600 and they are different parts, both NLA from Honda of course...

im getting ready to go thru my 5hp flathead. the goal is to remove govenor, install arc rod, maybe some new valve springs. thats it for now. in the future id like to keep going and do a cam, lifters, flywheel, etc, but for now i'm just keeping it simple and cheaper.. I am going to a float type...

I have a billet rod I bought from Clements Racing, I was told it is for a H50. I have my H50 apart and the stock rod is 0.15 longer than the Clements rod. The Clements rod is 3.95 , the rod out of this motor is 4.10. This is the second H50 I have seen this on, I figured the first one was a freak...

I really want to see how many people would really be interested in getting this done. I know price would have something to do with it also. I see I have almost 500 views but would like some kind of response before I get more than we need made (for me and my cousin). So I'm going to attempt to...

Gonna be doing some porting on my 18cc Predator head soon. New to porting, never done it before but I have a general understanding of what the process involves and the tools needed. It is to my knowledge that it is hard to mess up these heads (unless you have Parkinsons or something) with...

Gonna be doing some porting on my 18cc Predator head soon. New to porting, never done it before but I have a general understanding of what the process involves and the tools needed. It is to my knowledge that it is hard to mess up these heads (unless you have Parkinsons or something) with...

Just checking to see if there is any interest in a billet rod for the 3hp Briggs. I have a guy making some for the doodlebug 2.8 and may get him to do some for the Briggs once I get the 2.8 and test it. The question was asked so i was just checking for those that may be interested before I spend...

Sold to me as a part number 36972k which is the rod for an SBH 9994 H50 "Motorsports" performance engine. New in the box, I did open the sealed bag to check it out thats it. Far as I know this ISN'T going to fit your old H50 on your Rupp TT, this I think has to go along with a later model...

Would there be any interest in a billet rod for the 97cc dooble bug engine? I almost already know the answer but I had to ask. I know it's easier to replace it with the 212cc also.

Looking for a billet rod for a hsk60.

Hey all, I am restoring a 1974 5hp engine. The engine has not had very much use in its life, as there are faint remains of hone lines on the bore :laugh: I am doing this motor in its original white colours. I also plan to be using the stock flywheel. Which brings me to my point. I was...

Just got my rod in and it fits real tight on the crank. Has anyone had this happen. Also has anyone used the gx390 carb on the 212?