start

This is a placeholder for the upcoming repair of an old TrailMate that was pulled from my uncles barn. Most parts are there and it is in good shape. A couple people asked for pics to start so here are some of the frame and engine. The clutch in the picture is a big deal (check this thread for...

Went to the Ann Arbor show last weekend and it was well worth the 5.5hr drive. Fantastic show--never saw that many bicycles in my life. Great amount of Mini Bikes and parts. Picked up a super early Ruttman washer frame with the 4 spoke early Taco style mags. My other find was a Little...

Would it possible: To build a drag motor with a dual carb manifold, and run 1 gas carb and 1 alky carb? And have 2 tanks with separate fuel systems? And pull start the motor and get it running on gasoline and then switch it over once it's running to alcohol? Obviously there would have to be...

It's been a long road and what start off as a circuit racer will be a bad cruiser. With the help of some great people allot of studding patients and saving it's going down.

When eliminating the governor completely and siliconing the hole closed, don't forget that over revving will stretch the spring on the automatic decompression mechanism mounted on the cam. All of a sudden you won't be able to start your engine. Too much compression. You need to replace the...

https://www.youtube.com/watch?v=ql7hz1MV7kAhttps://www.youtube.com/watch?v=ql7hz1MV7kA

So about two years ago, close to my whole family came to Winber 2013 we had a blast and walked away with not one but three Cat Eliminator frames, of course back then we were minibike fiends. So we got back home to sunny South Florida compiled all the usable/good parts off each bike and sold the...

I was looking online and found an ad for 2 SST for sale for $250. From the looks they appear to be 80cc The pic was bad and upside down. One is missing a tail light and the other has a flat and wont start. I have been searching but can't find much recent info. Not sure if I should get them...

Have anyone attempted to make the back fender for a cat 350/400, I want to do it, but don't know where to start, if u can fabricate me one with clips, that'll be nice :hammer:

Help! I'm new to forums and I'm trying to figure out what's wrong with my DB 30. I bought a new DB30 over two years ago. Ran it off and on for less than 30 mins total and it just stopped working. No matter what I do, it won't start. I'm in the military and just moved to Germany and tried...

I was just reading a post like this but it was a little different. So I put on my air filter, adapter, breather, new header and 18 lb springs, after tightening the rocker arms, I broke one and bent the rods. So I put the stock springs back in and rockers and rods from another honda clone. But...

Hey guys, today was a pretty nice day in Michigan so I decided to start my bike up for the first time and take it for a ride. The bike decided otherwise. With the first pull it sounded like it wanted to start but then didnt. Then nothing after that and it seems as though with every pull gas...

I have a Duromax 16hp electric start engine I'm putting on a trike. It's missing the throttle linkage and muffler. I've found mufflers that'll work but I'm not sure which throttle linkage I need, does anyone kno? I also would like to kno which battery is recommended.

This could be a awesome start for cheap ! https://akroncanton.craigslist.org/for/4917899321.html

Killing me that photos upload 90 off. This is cup and spacer ring for Honda/Clone pull start. Cup is longer. This is for extra cooling. Picture of engine is what it looks like. This is on all GX200's BTW. 15$ plus 1lbs from 10509. PayPal. If you have a older Honda pull start with plastic...

After picking up the minibike from the autozone my son started the bike up noticing that the engine is a lot more quiet. When he rode it it almost flipped him off because of the torque which took some getting used to haha. The next day he rode it to his friends house and came back and was...

First of I am excited and very happy to find such a forum! I just picked up this blazer and I have tons of questions but I will start by asking about the chain mechanism I belive its a two speed but the linkage is gone does any body have pics of maybe a a short video of the how it works...

Well, got the motor started then I adjusted the idle screw on the side.....then,I went underneath an messed with the mixture screw an,that's when things got messed up Ok , 1st thing that happened was motor was running while giving it a little gas it Boaged up an died then wouldn't start...

Had to wait til the last minute to start the thread. I'm not making any promises I'll get the Harrison Wildcat done, but this might be the little jump start I need. I have most of the parts I need except some new tires. Not going to go over board, but I'm afraid I may already have done...

Are the shrouds the same physical size between the the 510-580 vs the 700's? :shrug: or is there a difference in size of the shroud or more importantly the backing plate/flywheel (other than pull start fitment) between what I guess is early with the fairbanks morse recoil vs the later style...