tools

Looks like a new kit. https://baltimore.craigslist.org/tls/6217445905.html

Being here got me digging through tools I have from way back. My Dad and I used to have a shop in our garage 30 years ago. I know there are more, just buried in the clutter someplace. There is even a press jig for straightening cranks buried somewhere.

Anyone used one of these? They're on sale for $99 right now and Northern has coupons for $20 off $100 Ironton OHV Horizontal Engine — 208cc, 3/4in. (19.05mm) x 2 19/64in. (58.5mm) Shaft | Ironton Engines| Northern Tool + Equipment Get a $20 off $100 purchase here Save with northern tools...

Was at my local Orchard Supply Hardware today to just get some bolts for my build off bike and ended up buying way too much!! Couldn't pass up the awesome deals!! 5 1/2'' trim saw, reciprocating saw, drill, flashlight, two lithium ion 19.2 batteries and charger NIB for $50...

Snap on, gray, craftsman, diamond calk horseshoe co, litton, mastercraft, westward, an old "twin" wrench, double headed crescent wrench

Several tools related to engine building for 5-hp Briggs flathead. Valve spring compressor, $15, fuel pressure pop-off pressure gauge for Tillotsen carburetors, complete with instructions, $20, jig with dial indicators for degreeing a cam, $40, boring torque plate, $20. Shipping additional per...

Hi all, Just to show I'm not a tool-snob, (after ripping on the HF vise), we made a video of our 5 favorite things from Harbor Freight tools. What would be your favorite HF find? Do any of you have one or more of the items we picked? https://www.youtube.com/watch?v=GhxA51eDGgo...

Mini bike Fabrication tools for sale: If you do a name search here you can find 2 builds that was done with this equipment. Mini bike frame jig/welding fixture. Fully adjustable for length, rake and height. If you can use a tape measure a level and a plumb bob this will produce dead on...

This will make those of you who like both vintage tools and vintage small engines ill. Dick! https://runningwithpowertools.wordpress.com/2013/06/27/fueltank-crab-hermit-carb/

I've bought and sold a few Tecumseh oem tools, manuals etc. over the last few years. Here's my latest find that I thought was pretty neat. This is a little different tool kit than the other kit they sold with seal drivers and flywheel knockers, this is kinda covers more stuff in the...

We have an oven at work we use for heat treating, welding steels and occasionally making pizza. It will go up to 2200°F or so. I had a oven rack with some surface rust on it and rather than clean it up with a scotch-brite or what ever I chose to burn it off in the oven at 1600°F. It got...

I'd like to hear some of your "tools" you use to get the new welsh plug into the carb nice and flat like from thje factory. In the past I used to not bother with it and hope for the best. And to be honest most of the carbs I've broken down and cleaned have run way better without touching them...

I can't seem to find a thread here that might list all the basic tools one might want to have for small engine repair/trouble shooting. But I'm sure over the years someone has had to have done this. If so can someone link it on this thread? If not, can someone list the top ten tools or...

What's the oldest tool you've got in your shop? I found this old pipe wrench and thought it needed to be preserved. It was well used and looks like it could've been made in the 40's or 50's. I cleaned it up with a wire wheel preserving much of it's age old patina as possible...

Hi, im getting deep into collecting and restoring vintage trikes. Im trying to build up by tool collection.. Ive been looking at buying an air compressor and sandblaster from harbor freight and was hoping to get some opinions... Ive been looking at the : Central Pneumatic 2.5HP, 21 Gal, 125 PSI...

homemade tools

home made tools

I just got done rebuilding the carburetor for my Tecumseh 3.5HP engine (off of my Ding-How / Nova R-S Minibike) and wanted to share some of the tools I used that proved to be super handy, some of which I discovered very recently. First off, was in invaluable Harbor Freight Ultrasonic...

Hi I'm looking into getting a tube bender and welder to start making my own mini bikes and such (hopefully) ... I was jus wondering if anyone could give me suggestions on what to look for in the tube bender spec wise and any suggestions on what type I welder to get.? I looked up the harbor...

im looking into getting a paint sprayer and was jus wondering if anyone could suggest one that would work well. im sick of using rattle cans and jus want to get some good tools now.. any suggestions on brand? type? certain specs? size? place to buy? im looking for one i can clean and use over...