removed

I am putting an H35 together after having received it disassembled. Mounting the ignition assembly (which is in one piece) looks straight forward but the plug wire seems to get compressed a good bit as the two bolts holding the assembly are tightened against the block. I see where I think...

This is the first time i've ever actually removed the governor. We've always just held it back with a spring. If i run it up slow it's good but, if i crack the throttle it hesitates & will die if i don't feather it. I have the aftermarket air filter(off for free flow) so it's getting plenty of...

I bought this a couple days ago. PO painted it black and removed part of paint so I removed the res and painted it black so it didn't rust. Has a seat. I don't know if it it the seat for it or not.

I guess its time to post this, I wasnt going to, but decided others might enjoy seeing it. Its the first time Ive done a complete flathead build so there was lots to learn. I traded some cyl head, crank, and clutch machine work for a 68 Bonanza roller and 2 Tec H50s...Thanks Randi! This engine...

this has been done a hundred times :laugh: old style predator was a cl find with all the goodies :thumbsup: but the block was crap previous owner had drilled out mounting holes real bad and there was over spray all over the block like the bike was painted with the motor on it and no side cover...

Hello to you all, I have searched a lot with no luck at all bit here I saw many that know about this engines, my engine is not from a minibike but from a genset, I got an AllPower 3500watts genset model APG3002D was working perfect, this Saturday I heard it was running out of gas so I went...

Hi I'm Ricardo I'm new to the mini bike world.. I have a predator 6.5 with the govern removed moves fast but I'm having a bit of trouble I have a fast take off but down the line it don't pick up much speed....what can I do to get top end spee ...people told me to get smaller sprocket... Please...

I've been reading these forums for quite some time now and I finally decided to post. I'm building a Hemi Predator with the following parts. ARC flywheel, ARC .020 over rod, Black mamba Jr cam/26lb springs, chromoly push rods, .010 head gasket, gx140 emulsion tube, #38 main jet...

Picked this streaker trike up during the winter. Been riding it around for the past couple weeks since we've had some decent weather here in Michigan. Rides and handles good. Turns on a dime and gives you change. Since these pictures were taken I have removed the 3.5hp tecumseh and will be...

I have no compression on this motor. everything turns over nice, I can feel air when sparkplug is removed - just not a lot. any ideas??

I bought this last week. It has a 3.5 HP B&S from 1959 the only id I can find is #120 stamped into the frame by the fork. Is it a Blazer? I was told it was a tote gote. I thought it might have been a trail skeeter. I have no idea. The engine mounts to a plate that can be removed from the...

Hey everyone, Just curious what main jet size you are running in Predator with light mods like air filter, header, and gov removed. I am in northern panhandle of West Virginia. I have the Predator 6.5hp with air filter, header, and gov removed. I got the 140 emulsion tube and a #93 / 0.37"...

I did it again...I purchased another Doodle Bug and will have another project. It started with me buying my daughter her DB30 ( which I P&P, removed governor, and added a header pipe). Then I bought one for myself and renamed it the Doodle Devil ( added Devil's tail sissy bar, side mount gas...

New hemi predator. Never started. Has been disassembled, clearances checked. Big end of rod opened up to .002+ oil clearance. Governor removed, low oil level sensor removed. Holes drilled and tapped and plugged. Has Arc top plate and throttle linkage, box stock pipe and rlv silencer. 10.8 valve...

How many rpms am.i seeing now? Thing is a rocket right out of the gate now!!:laugh:

So here is the next chapter in the process of evaluating my 1976 Briggs 5 hp engine. Since I was getting a 0 psi compression reading (I got 30 psi the day before), I thought that I had to remove the head to evaluate further. I found the head bolts to be just snug....not real tight at all. I...

Pulled the governor out, billet rod and flywheel, new throttle linkage setup, took it for a ride and I got sad. Nothing happened. I thought I was going to to 60 MPH :shrug:

Baja heat 6.5hp no governor and won't start please help Ok so I've had this baja heat for about 2-3years it's been running good and I decided to make it faster right before It started right up and then I took out the governor and put everything back on and now it won't start up it has spark and...

Just to keep the peace I have removed the Bonanza Brotherhood decals from Ebay and will not sell them. In my retardedness I didn't think about the DMC connection to the Bonanza name. Not that anyone contacted me about that infringement but I have been informed by a few members that the Bonanza...

Well i have removed the governor, but now the bike seems to take alittle bit to get started. Anyone have any good suggestion to making this bike start alittle better? Because as of right now, it takes sometimes up to 5+ pulls before it will start, and i have to give it alittle throttle for it to...