spring

Bully 3 disc 6 spring adult stock clutch with 15 tooth #35 driver. Brand new. $306 shipped. Paypal accepted.

April 27-29 Jefferson cty fairgrounds 503 N Jackson Ave. Hwy 18,6mi S.of I94 The Midwest's Largest Car Shows - Madison Classics

okay so i needed a valve spring compressor to install my valves in my xr50 race head, and couldnt find one at a local auto store, and the ones online were expensive and i didnt want to wait for shipping.... so i made my own! took a 6" C-clamp, and welded a 5/8" tube to it and made a cut out so...

i am trying to replace the valve springs in my 5hp briggs to compensate for the governor being removed, but i cannot find which valve springs i need. any help??

For sale A very nice Cat front suspension spring and cups. Very nice NOT perfect chrome.. $25.00 shipped

I believe I mentioned this idea here before. I would like to hear what some you guys thing. First, I believe that one spring chain tensioner only works half of the time, usually during acceleration. The problem is, without a very stiff spring, this chain tensioner will do nothing during...

I need a taco 100 kickstand for my Taco project. let me know if you got one. thanks

I picked up a set of the yellow driver springs for my TAV, any tips or advice on installing these?

Whats the trick to compressing the spring to install the split keepers..? Also is it normal for the inner spring to ride on the head that supports the valve guide vs down in the spring pocket like a normal spring....

Hi there fellas, I just built this spring chain tensioner for my DB30 today and thought I would share. It is just a 3'' peice of flat steel with 2 holes drilled in it, one at each end, about a 1/4'' away from the edge. The rest of the hardware is stock to the DB30. The spring is just a...

Buy or trade

Just purchased the black garter spring for my Maxtorque SS clutch... Anyone else using one and how much did it help improve take off?

Curious as to what kind of valve springs to use with a DynaCam SS-394 "Cheater" cam, and how to set the spring pressure? the DC web site recommends 20 pounds of spring pressure, but how is this set/determined?

Should i use a return spring on a brake band on a clutch brake. (placing the spring over the cable betweeen opening) With out the spring the band seems to ride very slightly on the clutch bell. When i put a return spring on the brake band cable the brake handle came back firmer but the band...

The max torque clutch bell was heating up, I cut 6 coils off. Wanted it to contact at higher rpm. The result was ...alright, I think it pulled out harder (more like a jerk when you gas it). The cutting was easy but putting the spring back was a pain. Took me about two hours to put it back on...

Can someone post the instructions on how to install a new clutch spring with the Zip Tie Trick? Max Torque 12t is what I am using. Suggestions on springs are welcome to! The search function via tapatalk is terrible.

Has anyone tried putting these hair pin springs on the rear bolts of the seat on a DB30. I'm trying to stay away from a whole lot of fab work until I get the MIG I want.

"Why isn't there an easier way to install valve springs?!" you might find yourself asking while wrestling with installing your valve springs. Raceseng has definitively answered that question once and for all because that's exactly what what we asked ourselves while developing our various valve...

Does the engine come with a throttle return mechanism installed? Or do you have to install one? What about a throttle return spring? Thank you!

Anyone care to loan or sell me the cutter (.900"dia.), that is used to cut valve spring pockets on the 5hp flathead? Pete