stock

as the title states im looking for some doodlebug parts I need a pull start for a 99cc as well as a stock carb. I am also needing a stock seat for a metal fender flat frame DB30 doodlebug. needs to be like new. If i cant find one of these fast Ill just make a seat, but i wont be making the...

This runs great ,is not your stock -Bronc. Don't care to ship. It's in St.Joseph,Mi. 525.00.

Murray Track 2 $500.00 OBO (((((( NO SHIPPING )))))) I will be bring this to Windber and will work with your shipper :thumbsup: Don't ask me to box it up and ship it because it wont happen :doah: The Good New wheel bearings 212 Predator Hemi (rejet and air cleaner and header w/muffler)...

Well I have been lucky enough to get this today. 1968 Twister Bought from original owner's grandson. His Grandfather went to Phoenix and bought it new in 1968. Bone stock survivor. I just dusted it off. Might be the crown jewel of my collection.

I have a non-hemi predator 212 and I'm looking for some upgrade advice. I have a 22mm Mikuni carb along with the curved intake manifold and angled air filter, racing spark plug, 18lb valve springs, billet flywheel, superbox exhaust(without muffler), stock cam, and stock rod. With this set up...

Is this cam able to be used with stock springs, rods, and flywheel?

Removed governor 18lb. Springs Air Filter Exhaust 1" Timing key 6 degree Emulsion tube 140 + 37 jet No start choked/non-choked.... Occasional blue flame out exhaust n carb.. Swapped back stock emulsion & jet got more blue flames out of carb n exhaust.. I may have failed on setting...

Have a Rupp tag on seat C-130372, Help with year, model and as built engine. I know it is not a stock engine.

Who knows the correct belt that was stock in 71-72

Does anyone know what size the oil drain bolt is on the 97cc stock engine?

Hi, ive been having an issue since upgrading the stock db30 engine for the predator 212. To max out the throttle on the predator engine I have to twist the stock db30 throttle much farther and i think beyond what it is meant to be twisted. It has gotten stuck a couple times halfway down when...

I recently purchased a 78 Rockford Chibi with a Bridgestone 60cc engine that was seized by the previous owner. I have a stock sized piston, but the cylinder has been bored to the 1st over specs. So I either need a stock bore cylinder or a 1st over piston. I'll get pics soon

How do I tell what springs I have ? Measurements? if I order 22lb springs can I use stock everything else? all I've done so far is air,exhaust, re-jet, timing key. if other parts are needed will 18lb allow stock parts ? I have a non-hemi with some hemi internals so determining...

Looking for a stock Briggs & stratton 3.5-4 HP engine. Let me know what you have. Thanks

I have a nice 4 hp mitsubishi, honda clone. I'm wondering if a 26mm mikuni is to much carb for it? What about a 5 hp IC briggs flat head. Engines are stock, just looking for a simple way to use a bigger tank on my tote gote.

Hey all, just picked up a bonanza bc100 or something along the lines of that.. Looking to get a pair of non stock forks for it as the stock ones are all jacked up. Any suggestions on what route to take?

out of stock anybody have one.

just like it says I am looking for a seat that isn't all ripped up, if anyone has one let me know thanks

Just purchased a Predator 212cc Hemi for use in my mini bike but had to remove air filter for frame clearance. Will replace stock air filter with aftermarket filter and adapter but not sure what needs to be done as far as rejetting. Engine is completely stock. Any experiences? Any help? Thank...

I have a non Hemi predator with a .020 longer rid and stock piston. I was wondering if there is enough room to throw in a flat top piston too without an issue or if I need a stock length rod? Bonus if I can use a smaller gasket!