tav2

Hi guys, I can get very cheaply brand new GX160, but is one with metric straight PTO shaft (20mm/OD x 50mm lenght) I can bore out the bore on 3/4" clutch assy on TAV2 to fit 20mm shaft but my main concern is lenght as the PTO shaft is 8.5mm (0.334") shorter than imperial PTO shaft. What do You...

I have a eBay tav2 knockoff. I recently noticed that the brass spacer on the drive clutch was broken in half which resulted in my belt turning inside out... When I initially put it on it seemed a little shorter than I thought it should be but I went with it.:hang::hang::hang: I have since...

I have a 212 with around 15hp and im going to run a 40 series torque converter setup but... They dont come with a mounting plate, they run by jackshaft. Would it be possible to mount 40 series on a tav2 plate or is there a reason the dont come with one? Or.. Could i modify a tav2 to hold up...

Guys, Here is a NIB Azuza complete 8" kit with everything needed to complete the build. I just don't have the time to build it. Azuza 8" Minibike kit with fenders, wheels, tires, chain, sprockets, kickstand, kill switch, all hardware included. Comet Tav2 Torque Converter. Dupor racing...

Heard lots about how good they work. whats the bad side(if any)?

Go Kart Mini Bike Torque Converter 35 Chain 3 4" Bore 12T Replaces 218352 | eBay

hi everyone. im new here and to the mini bike/small engine scene. i just bought a coleman ct200u 2 months ago with a 6.5hp hisun engine. all stock except the comet tav2 which i had to grind the rear chain guard mounting bracket off. took off the jackshaft and put on the tav2, added a 4ah battery...

The title doesn't really make sense, but let me explain. I bought a 1" 40/41 tav2 to use with a different project that didn't work out. I traded the driver for a 3/4" 30 series driver. I put it all together, and the belt is so tight it turns the wheel when I'm trying to crank it. Anyone know...

I mounted my tav2 on my predator 212 with the 9/16 spacer, but the outer half of the driver is only on the shaft by probably an inch? maybe a little less. Is that enough? It seems like that's on the verge of too little shaft to hold onto.

Does anyone know the thickness the driver spacer needs to be to put the TAV2 on a Predator 212? I don't have the spacer that came with the TAV2.

Hi guys, I have a tav2 30 series (asymetric) and I need to know which weights come with it when new. Is it the zinc 340 gram ones or is it something else?

I have a firehawk with 19 in tires a 10 tooth clutch and a 72 tooth rear sprocket. The top speed it 43 mph and it revs about 5500 rpms. If I were to get a tav2 would it be able to allow the motor to rev up to 5500 rpms with a 7.2:1 ratio? Or would it rev up about half way at 4000 ish rpms...

I was having a heck of a time getting my driven pre loaded and the snap ring back in so I made this tool and it worked great!! Cut out this 3/4'' piece of plywood the length of the driven...then cut out a hole big enough to give me room to get the snap ring in and nut. To reassemble...

I have a nos tav2 30 series asymmetrical torque converter with 3/4" drive. I installed it on a newer style doodle bug and one of the tabs were ground to clear the rear oil fill on a predator engine. It is brand new including the belt. The doodle bug was never started with the gave on it. The tav...

Looking to buy a good used Comet TAV2, 3/4" bore, #35 sprocket. Have PayPal money ready and waiting. Pm me with pictures and price Thanks!!

I got a new tav2 for $100 last month and was hoping it would fit my newer style doodlebug. I had to cut the chain tensioner off and the corner of the motor mounting plate. No modifications were done to the tav2. Thought I would post for anyone wanting to know if it would work. Sent from my...

Okay, so I got my swap kit from OldMiniBikes warehouse, and I'm gonna go pick up a predator from the local HF. It'll be a hemi model. I'm not gonna go wild with this one yet. I have a header, breather kit, and I'm gonna run a carb that I had on my clone that is on my race cart. mostly stock carb, but...

I swapped my modded Baja to a guy today and he seems to be having issues with it. When he drives it, the pin is coming out the back of the driven pulley. He said its sliding out. Is there a fix to this or something he needs to do to secure it? I appreciate the help. Would really like to see him...

Hello all, I have a TAV2 that I just mounted to my predator 212. The issue is that the TAV2 doesn't ever release the belt, so at idle it still wants to go. The TAV2 I bought was NOS from Comet, not the new knockoffs. I don't think it is the springs, even with the engine off and I turn it...

I have this mini bike I bought this week and am having buyers remorse now. I would like to get rid of it before my wife realizes I have yet another little toy. I am not sure exactly what it is or even how old it is. It has a 3.5 hp Tecumseh motor with a TAV2 on it. Belt looks good on it. When I...