track

Like it says these are my flat track bikes that iam taking down south to do battle with . My original 1970 Powell challenger model E ,My brothers 1967 Powell model B . Both are powered by slightly modified Briggs flatty's. The third bike is the somewhat famous super Powell . It has been lowered...

Always fun at Hell On Wheels "Hot August Nights". gate opens at 2pm practice starts at 4pm racing starts after practice, and goes on under the lights. $40 to race, $10 to spectate Fun! rules??? shoot, i don't know, "you gotta have a pull start." haha But, Just try to Keep in the...

Looking for some good ones:confused:

I have a Murray Track 2 that I am going to swap the engine on. I am swapping it with a Honda GC160 5hp engine. It came from a pressure washer. I am thinking of getting a new max torque clutch. Is there anything else I need to buy along with the new clutch? Does anyone know if the 3.5hp...

I picked up an almost like new Murray Track 2 today. Paint tires etc. are excellent. It shows a manufacturing date of 01043 and the tires are stamped 0048. This makes the tires the 48th week of 2000 and the bike 43rd week of 2001? The Tecumseh is an H35 45776Y. So far I've increased the idle...

Midwest 608 mini bike will be sponsoring the 125 ft Drags again August 12 in Symco WI. 5 mini bike classes. Test and tune Friday 5:00 , mini bike parade 6:00, Drags start at 11:00 am on Saturday. Rules and Classes on Midwest 608 mini bikes on Facebook.Preregister is open April 8,at Symco Hotrod...

There's a MX track about 15-20 mins from my house that also has a flat track which may be 1/5th mile or just a tick smaller. The track owner has flat track bike/mini sprint/atv practices scheduled off and on during the summer months.I have a vintage rear engine go kart that I'd love to get out...

since am far along with my other build i need to to get this one done ( it only been like this for 3 years) if you cant be in 2 class just let me know good luck to ever one thanks for having me.:scooter:

ill work on prices if you need just one part have a set of wheels with tires both have new valve stems new bearings rear has 60 tooth sprocket both hold air no leaks have a frame needs to be welded and down tube needs a patch as far as paint on the frame ide say multi color/painted with dead...

Rescued Murray Track 2 from the scrap pile. Before and after PICs.

I just bought a Murray Track 2 with a Tecumseh 3.5 hp. I think the clutch is going out on it because it will barely climb small inclines. Instead of buying another I was considering one of the cheap Tav2 knockoff converters off ebay. But am curious if its a direct fit on the engine and is...

A buddy of mine has one in great shape. I don't know much about mini bikes and didn't realize this was a 10+ year old bike. His looks great for its age. Said it wasn't used much. He priced it to me for $100 which at the time I thought was a good deal until I found out the age online and that it...

The April 2016 Mini Bike of the Month is Jeep2003's scratch built custom Clinton Board Track Racer. BRIEF HISTORY and INFORMATION: Bryan set out wanting to build a board racer, based on a bicycle, but did not want to use the typical 50cc chinese/clone engine (the one most commonly used...

Looking to buy a Murray track 2 mini racer, I would like to get the whole bike, with or without motor. thanks located in Richmond Va

Hello everyone, I just got word from one of my vintage karting buddies about some track time at the brodhead, WI vintage kart event at the sugar river raceway, July 7th-9th. This is the message I got from him: It looks like Marshal is going to offer mini bike track time at the Brodhead VKA...

Looking for a Murray top fork nut lmk Thanks Mike

Completed our Murray Track2 Predator 212 conversion. Thought I'd post up a link to a short video I took so folks could hear and see it run. This conversion was pretty straightforward and turned this minibike into and absolute torque monster. Getting thrown off this thing is not fun. If you do...

They got them on Christmas day in 2001. It was something like 12 degrees...notice they are not even wearing gloves lol. They will be redone by this Christmas - ready to be re-gifted. They are now 25 and 23 y.o. :smile:

Just picked this up for my "son" lol. Any simple tips, tricks, mods for this bike Tecumseh H35

I'm redoing the fuel line on my Murray track 2 mini bike and was wondering if there was any good or bad to the routing of the fuel line so close the engine. Tecumseh H35