cleaning

  1. J

    Cleaning the garage.

    Finally been a nice day to clean the garage to get the bikes out:scooter:
  2. cheezy1

    Cleaning garage floor part 2

    Like previous add states..cleaning up the garage floor. All items are cost of part plus shipping. Thanks..PM for questions or interest 1)Gold glitter grips...SOLD 2) Broncco speedometer kit...NOS never used. Full kit for 8'' and can be used on 10'' wheel bikes. Complete kit with every nut and...
  3. cheezy1

    Cleaning garage floor part 1

    I am going through my garage and selling off all parts new and old that are not attached to a bike. I have tons of stuff so stay tuned. All items will be cost of part plus shipping. Unless picking up locally. Thanks...:thumbsup: 1) Rear Rupp turbine rim assembly. The chrome was painted silver...
  4. Mean Dean

    Cleaning house

    1970-71' CCS Chopper. Been in my collection for years. Selling quite a few bikes actually and then I am taking a break. This is a rare Chopper. Newer Crate engine from the 80's runs and drives. Original Tires and wheels. Never cut broke or Butched. They did add a piece behind the engine plate...
  5. 19honda69

    spring cleaning

    Built some shelf's over the weekend .I don't have much extra room so this helped a lot.Put some earthquake straps in tonight,a must for California.Some of the Honda's will get moved to make room for 2 more Bonanza /Hodaka
  6. Phil1958

    Cleaning a Badge

    I have a Bonanza badge that one of the previous owners coated with a generous layer of rattle can paint and need to clean it up for use on a project. My concern is that some paint strippers may be a solvent for the red badge printing. Who's done this before and what cleaners did you...
  7. Truckasaurus44

    Spring cleaning - Motor, wheels, etc

    OK, Here's what I've dug out so far. PRICES DO NOT INCLUDE SHIPPING: 1) Tecumseh H60 - Part Number 143.756022 which is equivilant to a H60-75489N.Runs good. 3/4" x 1.75", keyed, un-drilled shaft. Hole drilled in the ugly original exhaust. Plug wire insulation is damaged right near the plug...
  8. Clayon

    Cleaning a coil?

    I'm calling on the guys who restore briggs motors to give me a hand with this one. Can you clean rust off of a coil? is there a solvent you can use? or will it just wreck it? will evaporust work? :shrug: I'm rebuilding some of my 5hp Briggs motors and the coil are the ones that don't use...
  9. J

    Questions about cleaning out old engine oil and adding new oil

    I am in the process of tearing apart a 1976 Indian M5A which was sitting for quite a few years. There was a decent amount of gunked up oil in there. I scraped out what I could, and although all of the gears turn freely, I would really like to clean it out a little better than just wiping it. I...
  10. patrick2260

    cleaning a rusty tank and I have ????'s.

    I picked up a copper Briggs a couple weeks ago. Tank is rusty and dirty on the inside. It was sitting in a shed for years. I added pea gravel and water and shook it like crazy....repeated this about 15 times. It's cleaner but is there a more thorough way to remove the rust? Am I gonna just...
  11. Valocalrep

    Cleaning engine

    OK so i decided to clean off my engine this weekend before i put it back on the mini. I have been doing a lot of research on here and i have a few different options A) Homemade soda blaster AircooledTech's Tools-On-The-Cheap - DIY Soda Blaster B)Gunk and a toothbrush Buy Solder Seal/Gunk...
  12. smokinsmo

    Cleaning House bike #3

    Next is the terra floater/ben hurr floater or whatever it is. What you see is what i have and what you get. :thumbsup: Frame is great no break or bends and not all gooped up with welds. The fenders are fiberglass, this is exactly how i got and just dont have time to get it done, so here it goes...
  13. smokinsmo

    Cleaning House 1974 Honda CT70

    I am selling my 1974 Honda CT 70 trail bike mini bike. I bought this from a older lady whos husband bought it new in 1974, There was a original title when bought new but the little older lady could not find it, so file for a lost title and your on the road. so im the second owner. I had plans to...
  14. smokinsmo

    Alsport Roller / Cleaning House !

    Alsport Tryke Roller / Cleaning House ! I have made the tough decision to let some go, about 11 in total to be exact. The hard truth is I dont have room for everything I have and Im just simply not going to get to restore all of them. So over the next few days Im going to be cleaning house...
  15. metalhead100

    Honda/clone basic carb cleaning detail pic

    Honda/clone basic carb cleaning detail pic Needs to be a Sticky!
  16. JamnJM

    Jet cleaning tool.....got a gas torch cleaner?

    Mikuni,Kehin,Carb jet cleaning tool, pilot and main | eBay Gas welding torch head cleaner for jet cleaning.....:eek:
  17. E

    tecumseh carburetor cleaning

    I'm working on the carburetor for a 4hp engine. The carburetor has a check ball in the main nozzle. The ball keeps sticking. I get it free so you can hear it rattle when you shake the carb. The engine runs and when I shut it off the ball is stuck again and it won't start. Pull the carburetor...
  18. trailramdan

    cleaning gas tanks info needed

    the ram and the buck we got the ol boy put diesel fuel inthem when he stored them. we goto fire em we put in fresh fuel and the inside of the tank has alight scale on it. plugging up the petcock....any easy ways to get this crap out so she will run! ? also on my ram the tank has been dry. i had...
  19. rdog348

    Cleaning Junk Out Of Gas Tanks?

    So, I was given an old racing engine that ran on, nitro? :shrug: It left a very sweet smelling gooey layer of paste in the bottom of the gas tank. It also heavily rusted it from what it looks like.. Is there a way to thoroughly clean the tank?
  20. smallbikes88

    Cleaning out the garage and found!

    Well i was going through the garage today doing some early spring cleaning and found i have aquired alot of turbine rupp wheels and alot of parts! Also found a early 60's fox campus with the square fenders? I only have seen one of these in a brochure. And the 1970 rupp roadster that i didnt...
Top